This finishing polish has a
built-in glaze for the ultimate "wet-look"!
BLACKFIRE Gloss Enhancing Polish is a
non-abrasive, polish & glaze combination. Use Gloss Enhancing Polish to remove old
wax, clean the top paint surface, visually reduce swirls and deepen the paint’s
gloss. It “wets” the surface to create the illusion of the paint
being under water. Gloss Enhancing polish helps hide minor swirls and
scratches without removing any paint or clear coat. It
"rounds-over" the leading edge of minor swirls which robs sunlight of a
sharp edge to cause a reflection. While this visually reduces swirls, it
does not remove them.
Gloss Enhancing Polish beautifies all colors of paint
with or without a clear coat finish. This polish is designed for single
stage or conventional, base coat, clear coat finishes. It is not designed for
nano, ceramic-particle, clear coats or scratch resistant clear coats. Ceramic
and scratch-resistant clear coats should be polished with BLACKFIRE Scratch
Resistant Clear Finishing Polish and Scratch Resistant Clear
Compound.
Product Update, April
2006: BLACKFIRE Gloss Enhancing Polish was changed mid-March,
2006 to be 100% VOC FREE! This makes the polish safer for your car's paint,
safer for your skin and safer for the environment. Gloss
Enhancing Polish will not weaken, dry or dull the paint with
repeated use. This is cutting-edge
polishing technology!
Polish Comparison:
Gloss Enhancing Polish has
half the cutting power of Menzerna Final Polish II. It is a combination
finishing polish and glaze but is not designed to remove swirls, spots or
paint defects. What this polish does do, in one step, is create the same liquid
wetness that would normally require using a separate polish and glaze. A
"glaze" is not required with this polish. It is built into the
formula.
Who should use this polish?
Gloss Enhancing Polish is
designed for newer vehicles or vehicles with a "like-new" finish. It
is designed for enthusiasts desiring the deepest, wettest gloss. When used under
BLACKFIRE Wet Diamond, All Finish Paint Protection, it's pure magic! The
combination of Gloss Enhancing Polish and Wet Diamond creates a liquid-like,
wetness that looks like you could reach into the finish. This combination is
especially stunning on black, red and dark colors but still shimmers on white,
grey and silver finishes.
If you have a show car,
concours car, hot rod or just want a show-car shine on your daily driver, use
Gloss Enhancing Polish and follow with a top coat of Wet Diamond.
Applies easily by hand or
machine.
Gloss Enhancing Polish wipes
on and buffs off easily by hand. Apply a
Quarter size amount of product to a dry applicator pad and wipe on the surface using small circular
motions. Apply to one section at a time (i.e. 1/2
hood, fender, etc.). Allow light film
to dry. Buff residues with a clean Microfiber cloth. If using a
dual-action, machine polisher like the Porter Cable 7424, apply with a Constant
Pressure, White Polishing Pad. Set the Porter
Cable's speed control between 3-1/2 and 4. Buff off residues with a clean
Microfiber cloth.
The Results:
|
|
|
A knock-out reflection
from BLACKFIRE Gloss Enhancing Polish
on the hood of customer C. Slagle's Miata SE. |
|
Gloss Enhancing Polish is VOC compliant in all 50 states.
Customer Comments:
"I have been using Liquid Glass on my
cars and trucks since 1986 and have always been very pleased with the finished
product. After reading your last newsletter, I decided to give Wet Diamond a
try. After e-mailing you about my plans, you recommended that I use Blackfire
Gloss Enhancing Polish to remove my old polish and give Wet Diamond a clean
surface to bond to. All I can say is "WOW!!" The paint on my car is a
dark blue and now it has such a deep, clear shine that it looks like it just had
ten coats of clear coat that hasn't yet dried. I am very impressed and wish I
would have made the change sooner. Thanks!!!
Pete T., Newburgh, IN
More Comments: "I
just did a quick detail using BLACKFIRE Gloss Polish and Wet Diamond
All Finish Paint Protection. I love how easy it is to remove the
polish. I don't have to pass a Microfiber cloth multiple times to
remove the residues. Two passes and it's gone. The photo below that
shows the bottle being reflected was taken after I applied Gloss
Enhancing Polish! I'm dead serious when I say that all I did
was wash, BF Polish and BF Paint Protection. Great products! Wet
Diamond All Finish Paint Protection made the paint REALLY black,
Even my father, not a detailing guy, asked if I used something new.
Love these products.
Dan S., Miami, FL.
|
|
|
This photo
was taken after polishing, before applying Wet Diamond All
Finish Paint Protection! |
Available in 16 oz. bottles. |