Protect your car's paint and
extend the life of clay bars.
Clay bars quickly remove
overspray and paint contamination leaving the cleaned surface "smooth as
glass". To work properly, all clays require a lubricant. Soapy water will
work in a pinch but it provides only minimal paint protection and the detergents
in some soaps can break down the clay causing it to disintegrate.
BLACKFIRE Detailing Clay
Lubricant is specially designed to work with all clay bars, natural or synthetic
(new PolyClays). Clay Lubricant creates a microscopic barrier between the paint
and the clay cleaning material. The high lubricity formula prevents loosened
contamination from scratching delicate clear coat finishes yet it will not break
down or degrade the integrity of the clay.
Usage Tip: Mist a
small area (2 sq. ft.) of the vehicle and rub clay cleaning material over the
surface. The clay will "grab" at first. Continue lightly rubbing the
clay over the surface until it moves freely. When the bar moves freely, the
surface is clean. Wipe off any residues with a towel and proceed to the next
area.
If clay residues resist easy
wipe off, re-mist the cleaned area with Clay Lubricant and wipe with a
clean towel. Even stubborn residues will wipe off easily.
Available in a 16 oz. spray,
32 oz. spray and 1 gallon refill.