Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant

Item #:	FS-MOS16
Ratings:
Price:	$24.99
Quantity:

Accessories/Sizes Description Reviews

Qty.

Gel Coat Micro Polish & Sealant 64 oz.
item#: FS-MOS64
Price: $69.99 Special: 59.99

Qty.

Power Scrubber Microfiber Applicator Pads Pkg/2
item#: PSAP-2N
Price: $7.99 Special: 5.99

Qty.

Perfect Shine Microfiber Buffing Cloth
item#: VIP-BUFN
Price: $7.99 Special: 5.99

Clean, level, protect and shine gel coat surfaces in one step!

If your boat is new, like new or freshly polished, Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant is all you need to create a deep, rich shine and retard oxidation for at least six months. This product performs every function necessary to keep your boat's standard or painted gel coat healthy, vibrant and oxidation free. First, it uses refined oils and special cleaning agents to remove micro-debris, marine scum and salt residues in the gel coat's pores. Think of this as using a body scrub on your skin before applying a sun tan lotion. Cleaning the pores in the gel coat greatly retards internal gel oxidation and will add years to the life of the gel coat.

Micro-fine polishing agents then burnish the finish smooth as glass. These are not coarse abrasives. This product is not designed to restore dull gel coats. This process of microscopically leveling the gel coat reduces induced and parasitic drag which increases hull efficiency and reduces fuel costs. Transitioning from stop to full throttle is faster and fixed speed cruising is smoother and you'll consume less fuel. Most boaters can feel the difference first time out.

Micro polishing also maximizes light reflection (shine) by creating a more mirror-like finish. We routinely receive comments like "awesome shine" and "I didn't know this level of shine was achievable on gel coats". It's a shine that turns heads!

Lastly, modern polymers seal the finish with an extremely tough, water and UV resistant barrier. This barrier protects the gel coat against marine contamination, industrial fallout, salt air, acid rain and UV induced slow fade. This protection will last up to 6 months even in salt water (normal, non-racing boating).

Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant is the most advanced sealant available for preserving and enhancing standard and painted gel coat finishes. It contains no butyl, oxalic acids or coarse abrasives. It does contain nearly five times the "solids" or active ingredients of other sealants.

One 16 oz. bottle is more than enough to seal and shine a 28 ft. boat.

Application Instructions:

Gel Coat Labs Micro-polish & Sealant can be applied and buffed in direct sunlight. On small boats and personal watercraft, apply by hand with a Microfiber Applicator Pad. For best results on larger vessels, apply with a dual-action polisher (Porter Cable 7424) using a 7.5 Inch, CCS Technology, Orange Power Pad.

Set the Porter Cable 7424's speed control between 4 and 5.


Set Porter Cable 7424 speed control between 4 and 5.	Attach a CCS Technology, Orange Power Pad to machine using a 6 inch Flexible, Hook-and-Loop Backing Plate.


Mist pad with Pad Lubricant.	Apply two lines of sealant to pad. Place pad on boat and turn machine on.


Move polisher in an up-and-down, back-and-forth motion over a 3 sq. ft. area until haze forms.	Buff off haze to reveal a brilliant shine.

Finished boat ready for water!

Apply two lines of sealant on the pad's surface. Mist pad with Pad Lubricant (optional). Place pad on the gel coat and turn the machine on.

Move polisher in an up and down, back and forth motion over a 3 square foot area until a haze starts to form. Buff off haze by hand with a Microfiber cloth. Continue in sections until the entire vessel is protected.

Available in a 16 fl. oz. bottle and a 64 oz. refill.

Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant

Related Items