Collinite Fiberglass Boat Wax No. 925

Collinite Fiberglass Boat Wax insulates the surface against the adhesion of foreign elements and assures full protection against deterioration, sun, rain, salt spray, exhaust stains... almost anything your boat can get into. It's so slick it can increase your boat speed, and decrease gas cost due to less drag.

Collinite Fiberglass Boat Wax contains a special pure Carnauba wax formula proven in harsh industrial environments. It will easily shrug off scrubbing, scuffing, detergents, salt water and marine organisms...all year long.

Directions for use:

• Shake well before using.
• Clean fiberglass thoroughly with Collinite Fiberglass Boat Cleaner No 920.
• Apply Collinite Boat Wax with a clean, folded, soft microfiber cloth or microfiber applicator and allow to dry to a haze.
• Buff off cleaner haze with another clean, dry, soft microfiber towel to produce the brightest colors with unbelievable durability.

16 fl. oz.

No matter which Collinite products you choose to use on your watercraft, here are some guidelines to help you get the most benefit.

• The ideal temperature range for using Collinite products is between 60 and 85 degrees. Using the product when the temperature is less than 60 degrees could result in streaking or difficulty in removing the product from the finish. 
• Avoid Applying the product in direct sunlight. Try to work in the shade. The heat from the sun will accelerate the rate at which the wax sets up on your finish, and will make removing the product very difficult. Make sure the finish is approximately between 68 and 70 degrees. 
• Make sure the finish is clean and dry before applying any wax to avoid creating swirls.
• Wax in a straight line, following the pattern that air would pass over your boat. Waxing in circles could lead to swirl marks.
• Apply the product in small sections at a time, usually 2x2 or 3x3 foot areas at a time.
• Use a soft-cotton cloth for your final buffing. Turn the cloth frequently and try to buff using straight lines.