Lake Country Flexible
Backing Plates for Circular Polishers

• The VELCRO® brand fastening material is molded into the plate eliminating delamination.
  

• The flexible edge reduces spontaneous heat build-up when transitioning from flat to contoured surfaces. These plates are recommended for compounding, polishing and finishing "soft" German clear coats.
  

• Vastly reduced heat transfer keeps motor heat from being transferred to the paint surface.

• Plated steel threaded insert will not cross-thread.
  

• Reinforced inner construction uses steel struts molded into the center hub for superior strength.
  

• Beveled outer edge allows easy pad removal and replacement.

    Always use the recommended size backing plate for the sized pad you are using. Never use a backing plate that is larger than the foam pad or disc.

    Do not use on 6 or 6-1/2 inch pads.

    Our FBP-375C plate has a standard, 5/8 x 11 threaded insert to fit professional circular polishers.

The 5/8-11 inserts fits professional circular polishers allowing quick and easy pad exchanges.

    The 5/8-11 inserts fits professional circular polishers allowing quick and easy pad exchanges. 

Note: When you use the FBP-6C backing plate with any of the 7.5 inch pads mentioned above, you will think the plate is too large for the back of the pad. It isn't. Center the plate's plug on the pad's center hole and work the edge of the pad around the plate with your fingers. It will fit the pad like a glove. Most domestic backing plates are not this precise but this is the way the plate is designed.

    This plate works  with our 8-1/2 inch, Advanced, Constant Pressure Pads,  8-1/2 inch Gel Coat Compounding Pads and 8-1/2 inch Gel Coat Finishing Pad.