Lake Country CCS Technology, <br> 6-1/2" Foam Pad Kits

New, 6.5 inch, CCS Technology, Professional Pad Kits

We have assembled three pad kits for use with the Porter Cable 7424 Polisher. The foam pads in these kits require that your Porter Cable 7424 polisher be fitted with either a 5" or 6" Hook and Loop Backing Plate. This backing plate may or may not have come with your machine.

If you are purchasing or have already purchased our 7424 Ultimate Detailing Machine, select one of the kits listed below that best fit your needs. These kits do not include a Hook and Loop Backing Plate because we supply a backing plate with our Ultimate Detailing Machine.

If you already own a Porter Cable 7424 Polisher and your machine does not have a Hook and Loop Backing Plate, order our part number FBP-6DA, 6 inch Flexible Backing Plate, at the bottom of this page.

The pads in these kits are the latest in Closed Cell Structure (CCS) foam technology.

What is CCS Technology?

The newer, harder, scratch-resistant clear coats require longer polishing times to remove swirls, spots and defects. The longer you polish with conventional foam pads, the less effective they become because polish migrates below the working surface of the pad. The pad "dries out."

CCS Technology solves this problem using strategic patterns of partially closed foam cells. These cells slow the rate of polish absorption, gradually releasing polish as needed by the operator. CCS Pockets reduce surface tension, prevent pad skipping and allow the operator to run the pad flat on the working surface.

CCS Pads feature two, additional, design innovations. First, they continue to incorporate the latest, Constant Pressure™ technology. Constant pressure may not be good for people but it's great for polishing pads where you want a uniform and constant pressure on the surface being polished. Professionals have learned through experience to keep their machines parallel to the surface being polished. Tilting the machine in any direction can result in an uneven and excessive pressure being transferred to the painted surface.
	Blue "Constant Pressure" foam backing absorbs unwanted polishing motions.
This new, patented, Constant Pressure technology uses a layer of engineered, instant rebound foam between the pad and the backing plate to absorb off-axis movements while keeping the pressure of the pad on the surface constant.

The other patented, innovation incorporated in CCS Pads are a curved outer edge. The curvature on the outer edge of the pad allows easy transitions over seams and inclines.

These pads do not have a traditional "polish pocket" because the CCS Cells regulate polish release, reduce splatter and eliminate paint "squiggles."

Whether you're a novice or a seasoned professional, these pads will yield consistently excellent results.

Curved outer edge allows easy
transition over seams.

We offer three different pad kits:

Our CCS65PGF-KIT is designed for newer vehicles with paint in "like new" condition or with very minor swirls. This kit contains the proper pads for light Polishing, Glazing and Finishing with your favorite polish, glaze and liquid wax or paint sealant. It will allow you to create a sizzling shine in a fraction of the time it would take by hand. We include a set of instructions that anyone can follow to achieve professional-like results.

Our CCS65PGF-KIT contains:

Two 6-1/2 inch CCS, White Polishing Pads. Use these pads with a polish (like BLACKFIRE Gloss Enhancing Polish, Menzerna Final Polish II) to maximize surface gloss and prepare the paint for the final wax or sealant. Polishing pads will "cake" with residues during polishing making them ineffective. It typically requires two pads to polish the average size car.
One 6-1/2 inch CCS, Black Glazing/Finessing Pad. Use this pad to apply a glaze (Menzerna Finishing Touch Glaze, 3M Imperial Hand Glaze, Meguiar's No. 7 Show Car Glaze) to enhance the paint's wetness and vibrancy while hiding minor swirls and defects.

One 6-1/2 inch CCS, Gold Finishing Pad. Use this pad to apply the final liquid wax or paint sealant (BLACKFIRE Wet Diamond, Menzerna FMJ.)
16 oz. spray, Foam Pad Lubricant & Residue Remover

Pkg/3 Snappy Clean Pad Cleaning Packets Three Microfiber Buffing Cloths. Use these to remove polish, glaze and wax residues. Instructions.
	Select this CCS65PGF-KIT for polishing, glazing & finishing.

Our CCS65CPF-KIT is designed for older vehicles with paint that is slightly dull and/or with deeper swirls, spots and defects. This kit contains the proper pads for Compounding to remove swirls and defects, final Polishing to restore surface gloss and Finishing with your favorite wax or sealant. Again, we include instructions that anyone can follow to achieve professional-like results in a fraction of the time it would take by hand.

Our CCS65CPF-KIT contains:

Two 6-1/2 inch CCS, Orange Power Pads. Use these with a compound (like Menzerna Intensive Polish) to remove swirls, minor scratches and paint defects. Compounding pads will "cake" with residues during compounding making them ineffective. It typically requires two pads to compound the average size car.
Two 6-1/2 inch CCS, White Polishing Pads. Use these pads with a polish (like BLACKFIRE Gloss Enhancing Polish, Menzerna Final Polish II) to maximize surface gloss and prepare the paint for the final wax or sealant. Polishing pads will "cake" with residues during polishing making them ineffective. It typically requires two pads to polish the average size car.
One 6-1/2 inch CCS Gold Finishing Pad. Use this pad to apply the final liquid wax or paint sealant (BLACKFIRE Wet Diamond, Menzerna FMJ.)
16 oz. spray, Foam Pad Lubricant & Residue Remover

Pkg/3 Snappy Clean Pad Cleaning Packets Three Microfiber Buffing Cloths. Use these to remove polish, glaze and wax residues. Instructions.
	Select this CCS65CPF-KIT for compounding, polishing & finishing.

Our last kit is a Deluxe Pad Kit for the serious enthusiast. It contains a 6-1/2 inch, CCS Technology pad for virtually every detailing situation. In addition, this kit contains a set of 4 inch, CCS Technology, Spot Repair Pads for working on smaller swirls, spots and paint defects. If you detail a number of different vehicles with different paint conditions, this is the kit to select. You'll always have the correct pad, regardless of the vehicle's age or paint condition.

Our CCS65DLX-KIT contains:

Two 6-1/2 inch, CCS, Yellow Compounding Pads. Use these with a compound (like Menzerna Intensive Polish) to remove deeper swirls, scratches, oxidation and paint defects. Compounding pads will "cake" with residues during compounding making them ineffective. It typically requires two pads to compound the average size car.
Two 6-1/2 inch, CCS, Orange Power Pads. Use these with a compound (like Menzerna Intensive Polish) to remove light swirls, minor scratches and paint defects. Again, it typically requires two pads to compound the average size car.
Two 6-1/2 inch, CCS, Green, German Polishing Pads. Use these pads with a polish (like BLACKFIRE Gloss Enhancing Polish, BLACKFIRE Scratch Resistant Clear Finishing Polish, Menzerna Final Polish II) to polish the newer, harder, scratch resistant clear coats or whenever extra cleaning power is needed. These are also the best pads for applying one-step, polish/sealants like Klasse All-In-One and Menzerna One-step, Acrylic Jacket. Polishing pads will "cake" with residues during polishing making them ineffective. It typically requires two pads to polish the average size car.
Two 6-1/2 inch, CCS, White Polishing Pads. Use these pads with a polish (like BLACKFIRE Gloss Enhancing Polish, Menzerna Final Polish II) to maximize surface gloss and prepare the paint for the final wax or sealant. Polishing pads will "cake" with residues during polishing making them ineffective. It typically requires two pads to polish the average size car.
One 6-1/2 inch, CCS, Black Glazing/Finessing Pad. Use this pad to apply a glaze (Menzerna Finishing Touch Glaze, 3M Imperial Hand Glaze, Meguiar's No. 7 Show Car Glaze) to enhance the paint's wetness and vibrancy while hiding minor swirls and defects.
One 6-1/2 inch, CCS Gold Finishing Pad. Use this pad to apply the final liquid wax or paint sealant (BLACKFIRE Wet Diamond, Menzerna FMJ.)
One 4 inch, CCS, Orange Power Pad Jr. Use this with a compound (like Menzerna Intensive Polish) to remove light swirls, minor scratches and paint defects in a specific area.
One 4 inch, CCS, White Spot Polishing Pad. Use this pad with a polish (like BLACKFIRE Gloss Enhancing Polish, Menzerna Final Polish II) to maximize surface gloss or remove light swirls or spider webbing.
One 4 inch, CCS, Gold Finishing Pad. Use this pad to apply the final liquid wax or paint sealant after spot polishing (BLACKFIRE Wet Diamond, Menzerna FMJ.)
One, 3.5 inch, Flexible Backing Plate. This fits the Porter Cable 7424 polisher allowing you to use the 4 inch, Spot Repair Pads.
16 oz. spray, Foam Pad Lubricant & Residue Remover

Pkg/3 Snappy Clean Pad Cleaning Packets Three Microfiber Buffing Cloths. Use these to remove polish, glaze and wax residues. Instructions.
	Select this CCS65DLX-KIT for covering every detailing situation.

Proper Care:

Before you start working, prepare a bucket of water with a packet of Snappy Clean Pad Cleaning Powder. As pads become dirty, place them in the bucket to soak. Do not allow polish and sealant residues to dry in the pad. When you're done polishing and waxing, rinse the pads thoroughly, hand squeeze out excess water against flat surface and allow to air dry. Do not wring dry. Do not machine wash or dry 6-1/2 inch pads.

The Microfiber buffing cloths should be machine washed by themselves in warm water using a mild laundry detergent or Micro-Restore. Do not use bleach or fabric softeners. Machine dry at air temperature (no heat) or allow to air dry.

Lake Country CCS Technology, 6-1/2" Foam Pad Kits

Lake Country CCS Technology,
6-1/2" Foam Pad Kits