Hook and Loop backing
plates
for circular polishers.
We offer Hook
and Loop Backing Plates for professional circular polishers in a number of sizes.
These plates allow you to quickly and easily install and remove various
hook-and-loop discs and foam pads. These plates feature commercial grade, body
shop quality construction with VELCRO® brand fasteners. They do not require ventilation holes. They will not
transfer motor heat from the polisher into the pad. The hook backing is attached
to the plate with an epoxy glue to insure years of reliable service.
Always use the
recommended size backing plate for the sized pad you are using. Never use a
backing plate that is larger than the foam pad or disc.
These backing
plates have the industry standard 5/8-11 opening common to all professional,
circular polishers.
| VBP-4C - Use this 3.5
inch Hook and Loop Back-up Plate to safely hold 4 inch wool discs and
foam pads. This is the ideal size for spot repairs as it allows you to
focus on a small area without affecting the surrounding paint. Our VBP-4
Plate is treaded with a 5/8-11 receptacle for use with professional
circular polishers. |
|
