Spray wheel
wells to a factory new appearance.
Wurth High Build Underbody Spray produces a jet
black, textured finish in wheel wells and on lower rocker panels. This spray
will hide a multitude of blemishes and make old wheel wells look factory new.
Underbody Spray provides permanent yet flexible protection against flying
stones, rust, water and road salts.
Before using, scrub wheel wells with a degreaser such as
Amazing Roll Off, P21S Total Auto Wash or Wurth Clean Solve. Rinse and allow to
dry thoroughly. Mask off areas you don’t want covered. Spray on Underbody
Spray and wait 40 minutes before driving the vehicle. One can will allow two
thin coats on all four wheel wells.
| Shipping
Note: Federal regulations prohibit the shipment of aerosol products
by air. This item is shipped by UPS Ground and only within the 48
connected United States. Sorry, we can not offer express 2 day or 3 day
delivery on this product nor can we ship outside of the 48 connected
United States.
California
Customers: We are sorry but we cannot ship this product into
California.
|
|
|
Usage Note: Shake can vigorously
before using until ball inside can rattles freely. Shake occasionally
during usage. To self-clean nozzle, shake can vigorously, turn can upside
down and spray for 4 to 5 seconds to clear nozzle. Apply 2 or 3 even coats
for full coverage allowing 5 minutes between coats.
Made in Germany.
Net wt. 19.5 oz.
aerosol.
|
